Tubes

przewody i akcesoria wentylacyjne

Spiro coil pipe

2_1_rura_zwojana_spiro_w (1)

d [mm] L [mm] k [mm]
100  3000 0,50
125 3000 0,50
150 3000 0,50
160 3000 0,50
180 3000 0,50
200 3000 0,50
250 3000 0,60
315 3000 0,60
355 3000 0,60
400 3000 0,60
450 3000 0,80
500 3000 0,80
560 3000 0,80
630 3000 0,80
description:
  • standard length 3 m
  • hot galvanized steel
  • both sided coating has the density of 275 g/m3 [Z275 class]
  • reinforcing external embossment for d>150 mm
  • dimensions possible upon request: d=710, 800, 900,1000,1250 [mm]
  • we are able to produce pipes with different length and individual steel thickness
 
EP-N flexible aluminium duct, not insulated

SONY DSC

description:
  • duct for air transport in ventilation duct systems
  • material - aluminium laminate with polyester
  • steel wire spiral reinforcement
  • standard length - 10 m fitted into 0,5 m cardboard box
  • possible diameter range 83 - 635 mm
  • operating temperature range -30 C/+140 C
  • maximum operating pressure - 2500 Pa
  • accordance with PN-EN 13180:2002
  • high resistant to mechanical damage
EP - I.140 flexible aluminium duct, insulated

OLYMPUS DIGITAL CAMERA

description:
  • duct for air transport in ventilation duct systems
  • internal layer - perforated flexible aluminium duct EP-N
  • polyester foil between the internal duct and insulation layer
  • 25 mm mineral wool insulation, density: 20 kg/m
  • external material - aluminium laminate with Polyester
  • steel wire spiral reinforcement
  • standard length - 10 m fitted into 1m cardboard box
  • possible diameter range 83 - 635 mm
  • operating temperature range -30 C / +140 C
  • maximum operating pressure - 2000 Pa
  • accordance with PN-EN 13180:2002
  • 50 mm insulation upon request
EP-I.250 flexible aluminium duct, insulated

SONY DSC

description:
  • flexible and thermally insulated ventilation duct
  • internal layer - non combustible flexible duct, does not contain any polyester
  • 25 mm mineral wool insulation, density: 20 kg/m
  • external cover is made of multi layer laminated aluminium reinforced with carbon fibre
  • steel wire spiral reinforcement
  • standard length - 10 m fitted into 1m cardboard box
  • possible diameter range 83 - 635 mm
  • operating temperature range -30 C / +140 C
  • maximum operating pressure - 3000 Pa
  • accordance with PN-EN 13180:2002
EP-F aluminium duct, not insulated

SONY DSC

description:
  • material - aluminium
  • aluminium tape thickness - 0,1 mm
  • standard length - 3 m, (average lenght: 0,8 m)
  • possible diameter range 80 - 500 mm
  • operating temperature range -25 C / +200 C
  • maximum operating pressure - 2000 Pa
  • accordance with PN-EN 13180:2002
  • product has a Technical Approval: AT/98-05-0066; III/2004
Sectional bend

3_1_kolano_segmentowe_w

α = 15°, 30°, 45°, 60°, 90°

TYPE [mm] d [mm] h [mm]
100 98,8 80
125 123,8 80
150 148,8 80
160 158,6 80
180 178,6 80
200 198,6 80
250 248,5 80
300 298,4 80
315 313,4 80
355 353,4 80
400 398,4 80
450 448,2 80
500 498,0 80
560 558,0 80
630 628,0 80
710 708,0 80
800 798,0 80
900 898,0 80
1000 998,0 80
1250 1248,0 80
description:
  • hot galvanized steel
  • segments connecting with a lock
  • spot welding
Pressed bend 90°

3_2_kolano_tloczone_w_part1

TYPE [mm] d [mm] z [mm] h [mm] waga [kg]
80 78,9 100 40 0,26
100 98,9 100 40 0,33
125 123,9 125 40 0,47
150 148,9 150 40 0,62
160 158,9 160 40 0,72
180 178,9 180 40 0,84
200 198,9 200 40 1,06
250 248,9 250 50 1,94
description:
  • hot galvanized steel
  • single pressed element
  • linear weld
  • reinforced edges (flanged)
Pressed bend 60°

3_2_kolano_tloczone_w_part2

TYPE [mm] d [mm] z [mm] h [mm] waga [kg]
80 78,9 100 40 0,20
100 98,9 100 40 0,25
125 123,9 125 40 0,37
150 148,9 150 40 0,44
160 158,9 160 40 0,53
180 178,9 180 40 0,79
200 198,9 200 40 0,90
description:
  • hot galvanized steel
  • single pressed element
  • linear weld
  • reinforced edges (flanged)
Pressed bend 45°

3_2_kolano_tloczone_w_part3

TYPE [mm] d [mm] z [mm] h [mm] waga [kg]
80 78,9 100 40 0,18
100 98,9 100 40 0,22
125 123,9 125 40 0,31
150 148,9 150 40 0,39
160 158,9 160 40 0,45
180 178,9 180 40 0,53
200 198,9 200 40 0,64
250 248,9 250 50 1,16
description:
  • hot galvanized steel
  • single pressed element
  • linear weld
  • reinforced edges (flanged)
Pressed bend 30°

3_2_kolano_tloczone_w_part4

TYPE [mm] d [mm] z [mm] h [mm] waga [kg]
80 78,9 100 40 0,15
100 98,9 100 40 0,18
125 123,9 125 40 0,30
150 148,9 150 40 0,31
160 158,9 160 40 0,43
180 178,9 180 40 0,51
200 198,9 200 40 1,01
description:
  • hot galvanized steel
  • single pressed element
  • linear weld
  • reinforced edges (flanged)
Pressed bend 15°

3_2_kolano_tloczone_w_part5

TYPE [mm] d [mm] z [mm] h [mm] waga [kg]
80 78,9 100 40 0,11
100 98,9 100 40 0,15
125 123,9 125 40 0,30
150 148,9 150 40 0,31
160 158,9 160 40 0,33
180 178,9 180 40 0,37
200 198,9 200 40 0,47
description:
  • hot galvanized steel
  • single pressed element
  • linear weld
  • reinforced edges (flanged)
Pressed reducer

3_3_redukcja_tloczona_w

TYPE [mm] d1 [mm] d2 [mm] h [mm] h1 [mm] h2 [mm] waga [kg]
100 - 80 98,8 78,7 110 55 40 0,50
125 - 80 123,8 78,7 122 55 40 0,20
125-100 123,8 98,8 112 55 45 0,20
150-100 148,7 98,8 125 55 45 0,40
150-125 148,7 123,8 122 55 45 0,20
160-100 158,7 98,8 130 55 45 0,30
160-125 158,7 123,8 117 55 45 0,20
200-100 198,6 98,8 150 55 45 0,40
200-125 198,6 123,8 137 55 45 0,40
200-150 198,6 148,7 125 55 45 0,31
200-160 198,6 158,7 120 55 45 0,36
250-160 248,5 158,7 144 55 45 0,60
250-200 248,5 198,6 125 55 45 0,58
315-160 313,4 158,7 177 55 45 0,86
315-200 313,4 198,6 157 55 45 0,83
315-250 313,4 248,5 132 55 45 0,82
355-250 353,4 248,5 200 45 45 1,0
355-315 353,4 313,4 160 50 50 0,99
description:
  • hot galvanized steel
  • single pressed element
Symmetric segmented reducer

3_4_redukcja_segmentowa_symetryczna_w (2)

d1 [mm] d2 [mm] h [mm] a [mm]
100 80 100 80
125 100 100 80
160 100 100 80
160 125 100 80
200 100 100 80
200 125 100 80
200 160 100 80
250 100 150 80
250 125 150 80
250 160 100 80
250 200 100 80
315 100 200 80
315 125 200 80
315 160 150 80
315 200 150 80
315 250 150 80
315 300 150 80
400 160 200 80
400 200 200 80
400 250 150 80
400 315 100 80
450 200 200 80
450 250 200 80
450 300 150 80
450 315 100 80
450 355 100 80
450 400 100 80
500 200 200 80
500 250 200 80
500 315 200 80
500 400 100 80
500 450 100 80
630 315 200 80
630 400 200 80
630 450 200 80
630 500 100 80
800 350 200 80
800 400 200 80
800 450 200 80
800 500 200 80
800 630 200 80
1000 630 200 80
1000 800 200 80
1250 800 200 80
description:
  • hot galvanized steel
  • segments connecting with a lock
  • spot welding
 
Asymmetrical segmented reduce

3_5_redukcja_segmentowa_niesymetryczna_w

d1 [mm]  d2 [mm] h [mm] a [mm]
100 80 100 80
125 100 100 80
160 100 100 80
160 125 100 80
200 100 100 80
200 125 100 80
200 160 100 80
250 100 150 80
250 125 150 80
250 160 100 80
250 200 100 80
315 100 200 80
315 125 200 80
315 160 150 80
315 200 150 80
315 250 150 80
315 300 150 80
400 160 200 80
400 200 200 80
400 250 150 80
400 315 100 80
450 200 200 80
450 250 200 80
450 300 150 80
450 315 100 80
450 355 100 80
450 400 100 80
500 200 200 80
500 250 200 80
500 315 200 80
500 400 100 80
500 450 100 80
630 315 200 80
630 400 200 80
630 450 200 80
630 500 100 80
800 350 200 80
800 400 200 80
800 450 200 80
800 500 200 80
800 630 200 80
1000 630 200 80
1000 800 200 80
1250 800 200 80
description:
  • hot galvanized steel
  • segments connecting with a lock
  • spot welding
Twin bend

trójnik-orłowy

α = 45°, 90°, 120°

d1 [mm] d2 [mm] a [mm] L [mm]
100 100 80 120
125 100 80 120
125 125 80 120
160 100 80 120
160 125 80 120
160 160 80 120
200 125 80 150
200 160 80 150
200 200 80 150
250 160 80 200
250 200 80 200
250 250 80 200
315 200 80 200
315 250 80 200
315 315 80 200
400 250 80 250
400 315 80 250
400 400 80 250
500 250 80 350
500 315 80 350
500 400 80 350
500 500 80 350
  description:
  • hot galvanized steel
  • spot welding
Reducing tees

trójnik-redukcyjny

 
d1 [mm] 80 - 1250
d2 [mm] 80 - 1250
d3 [mm] 80 - 1250
description: - hot galvanized steel - spot welding - the outgoing connection is fitted with bossings
Collar sadle

3_8_nakladka- tloczona

 
d [mm] 80 - 1250     
h [mm] 100
a [mm] 15
description:
  • hot galvanized steel
  • spot welding
Coupling

3_9_nypel

possible dimensions range:
d [mm] 80 - 1250
 d < 800 [mm] h = 100 [mm]
d > 800 [mm] h = 150 [mm]
description:
  • hot galvanized steel
  • spot welding
Sleeve

3_10_mufa

possible dimensions range:
d [mm] 80 - 1250
d < 800 [mm]  h = 100 [mm]
d> 800 [mm]  h = 150 [mm]
description:
  • hot galvanized steel
  • spot welding
Straight branching

3_11_sztucer cylindryczny_prosty_w

possible dimensions range:
d [mm] 100 - 1250
h [mm] 80
z [mm] 15
description:
  • hot galvanized steel
  • spot welding
Round ventilating vavle

3_12_zawor_wentylacyjny_okragly_w

TYPE [mm]     d [mm]    h [mm]     a [mm]  
160 159 140 257
200 199 140 307
250 249 140 357
  description:
  • hot galvanized steel
  • types: air supply valve and air exhaust valve
Duct end cup

3_13_zaslepka_przewodu_w

  possible dimensions range:
d [mm] 100 - 1250
h [mm] 80
 description:
  • hot galvanized steel
  • spot welding
Net straight branching

3_14_zaslepka_z_siatka

possible dimensions range:
d[mm] 100 - 1250
h[mm] 80
description:
  • hot galvanized steel
  • spot welding
  • expanded metal mesh, openings 10 x 10 [mm]
 
Single blade round damper

przepustnica-jednopłaszczyznowa

TYPE [mm] d [mm] L = d+40 mm [mm]
 100 98 138
125 123 163
160 158 198
200 198 238
250 248 288
315 313 353
400 398 438
500 498 538
630 628 738
700 698 738
800 798 838
900 898 938
1000 998 1038
description:
  • hot galvanized steel
  • spot welding
Black draft damper

przepustnica-zwrotna

TYPE [mm] d [mm] L [mm] a [mm]
100 100 88 38
125 125 88 38
150 150 88 38
160 160 88 38
200 200 88 38
250 250 128 59
315 315 128 59
400 400 197 75
description:
  • hot galvanized steel
  • the damper’s oscillating blades are closed by a spring (assembly is possible in any position)
Duct damper type IRIS

przepustnica-kanałowa

TYPE [mm] d1 [mm] d2 [mm] L [mm] a [mm] x [mm] y [mm]
100 99 165 110 30 32 70
125 124 210 110 30 32 70
160 159 230 110 30 35 70
200 199 285 110 30 42 70
250 249 335 135 40 42 70
315 314 410 135 40 47 70
400 398 525 190 60 62 70
description: Duct damper type IRIS enable to adjust continuously the intensity of air flow. Diameter of the opening can be adjusted with a handle located on the damper. The damper is supplied with a gasket which enable to connect it tight with the system.  
Multi blade aluminium damper

przepustnica-wielopłaszczyznowa_big

possible dimensions range:
h [mm] 200 - 2000
z [mm] 200 - 2000
L [mm] 175
description:
  • cover - hot galvanized steel
  • aluminium louver slats
  • driving cogs made of PA material
  • the dampers are manually powered
  • we are able to produce a servo powered version
Single blade rectangular damper

4_5_przepustnica_jednoplaszczyznowa_prostokatna_W

possible dimensions range:
a [mm] 200 - 500
b [mm] 200 - 500
y [mm] b+50 mm
description:
  • hot galvanized steel
  • the damper’s frame is made of shapes and a corners
  • size of the shapes and corners depends on the damper’s section
Round intake / exhauster

czerpnia

d1 [mm] d2 [mm] h [mm] z [mm]
80 96 15 5
100 125 20 5
125 150 20 5
160 185 20 5
200 225 20 5
250 275 20 5
315 350 20 5
400 435 35 5
500 540 40 5
description:
  • material - aluminium
  • inner security net
Rectangular air intake

czerpnia-ścienna

possible dimensions range:
h [mm] 200 - 2000
z [mm] 200 - 2000
a [mm] 40
L [mm] 62
description:
  • hot galvanized steel
  • we are able to produce elements with different dimensions
Round gravity ventilator

wywietrzak-cylindryczny

d1 [mm] d2 [mm] h [mm] h1 [mm]
100 200 285 160
125 250 330 175
160 320 372 192
200 400 455 252
250 500 525 300
300 600 645 330
315 630 700 394
400 800 880 480
450 900 930 520
500 1000 1000 590
630 1260 1270 760
800 1600 1550 940
1000 2000 1950 1200
description:
  • hot galvanized steel
Roof round air intake type C

wyrzutnia1

d1 [mm] d2 [mm]  h1 [mm]  h2 [mm]   h3 [mm]
100 200 175 70 50
125 250 200 70 50
160 320 260 75 55
200 400 340 80 60
250 500 425 100 75
315 630 530 125 95
400 800 680 160 120
500 1000 850 200 150
630 1260 1070 250 190
800 1600 1360 320 240
1000 2000 1700 400 300
description:
  • hot galvanized steel
  • steel mesh for inlets protection
  • we are able to produce elements with different dimensions
Roof round air exhauster type C

wyrzutnia2

d1 [mm] d2 [mm] d3 [mm] h1 [mm] h2 [mm] h3 [mm]
100 125 200 175 70 50
125 156 250 200 70 50
160 200 320 260 75 55
200 250 400 340 80 60
250 312 500 425 100 75
315 393 630 530 125 95
400 500 800 680 160 120
500 625 1000 850 200 150
630 786 1260 1070 250 190
800 1000 1600 1360 320 240
1000 1250 2000 1700 400 300
description:
  • hot galvanized steel
  • we are able to produce elements with different dimensions
Roof rectangular air intake / exhauster type A

wyrzutnia-3

TYPE a x b [mm] a1 [mm] b2 [mm] h1 [mm] h2 [mm] h3 [mm]
250 x 250 450 450 300 100 75
250 x 400 490 640 300 120 105
250 x 630 540 920 300 140 100
400 x 400 720 720 300 160 120
400 x 630 800 1030 300 180 170
630 x 630 1130 1130 300 250 190
630 x 1000 1250 1620 300 320 265
630 x 1600 1370 2340 300 370 380
1000x1000 1800 1800 300 400 295
1000x1600 2000  2600 300 500 425
description:
  • hot galvanized steel
Roof rectangular air intake / exhauster type B

wyrzutnia-4

TYPE a x b [mm] a1 [mm] b2 [mm] h [mm]  h1 [mm]  h2 [mm]
250 x 250 340 340 500 300 30
250 x 400 340 490 500 300 35
250 x 630 340 720 500 300 35
400 x 400 490 490 600 300 45
400 x 630 490 720 600 300 45
630 x 630 720 720 700 300 70
630x1000 720 1090 700 300 85
630x1600 720 1690 800 300 95
1000x1000 1090 1090 1100 300 100
1000x1600 1090 1690 1100 300 105
description: 
  • hot galvanized steel
  • steel mesh for inlets protection
  • we are able to produce elements with different dimensions
Roof base B-I, B-II, B-III

podstawa-dachowa (2)

d[mm] h1[mm] h2[mm] x[mm] y[mm] z[mm]
100 50 160 300 350 400
125 50 160 325 375 425
160 50 160 360 410 460
200 50 160 400 450 500
250 50 160 450 500 550
315 50 160 515 565 615
400 50 160 600 650 700
500 50 160 700 750 800
630 50 160 830 880 930
800 50 160 1000 1050 1100
description: 
  • hot galvanized steel
  • B-III roof base contain counterbalance
  • we are able to produce elements with different dimensions
Rectangular roof base type A

podstawa-dachowa-typ-a

TYPE a x b [mm] a1 [mm] b1 [mm] a2 [mm] b2 [mm] h1 [mm] h2 [mm]
250x250 450 450 500 500 50 160
250x400 450 600 500 650 50 160
250x630 450 830  500  880 50  160
400x400 600 600  650  650  50  160
400x630 600 830  650  880  50  160
630x630 830 830  880  880  50  160
630x1000 830 1200  880  1250  50  160
630x1600 830 1800  880  1850  50  160
1000x1000 1200 1200  1250  1250  50  160
1000x1600 1200 1800  1250  1850  50  160
description:
  • hot galvanized steel
Round acoustic silencer

tłumik

possible dimensions range:
d [mm] 100 - 1250
L [mm] 1000
a [mm] 100
b [mm] 100
description:
  • panel sound silencer reduce the noice in duct ventilation and HVAC systems
  • hot galvanized steel
  • sound attenuating material - mineral wool, density 60 kg/m
  • we are able to produce elements with different dimensions
Rectangular acoustic silencer

tłumik-akustyczny-płytowy

x [mm] quantity walls h [mm] L [mm] y [mm] z [mm]
200 1  300lub450lub600 1000  100 100lub150lub200
400 2
600 3
800 4
1000 5
1200 6
1400 7
1600 8
description:
  • panel sound silencer reduce the noice in duct ventilation and HVAC systems
  • hot galvanized steel
  • sound attenuating material - mineral wool, density 60 kg/m
  • we are able to produce elements with different dimensions
  • maximum X x H diameter - 1600 x 1600 mm
Round flexible connector pipe

króciec-elastyczny-okrągły

d1 [mm] d2 [mm] d3 [mm] d4 [mm] quantity of holes [n] L [mm]
200 239 260 10 6 155
250 289 310 10 8 155
315 361 391 12 8 155
400 400 400 12 8 155
500 573 600 15 16 155
630 703 750 15 16 155
800 875 920 15 20 155
1000 1093 1120 15 24 155
description:
  • flexible duct eliminate the vibrations transmitted by the devices
  • vibrations elimination material - flexible tape
  • connector’s collar made of no galvanized steel
  • we are able to produce elements with different dimensions
Rectangular flexible duct connector

króciec-elastyczny-prostokątny

x [mm] y [mm] L [mm]
160 160 155
200 160 155
200 200 155
250 160 155
250 200 155
250 250 155
315 160 155
315 200 155
315 250 155
315 315 155
400 160 155
400 200 155
400 250 155
400 315 155
400 400 155
500 200 155
500 250 155
500 315 155
500 400 155
500 500 155
0630 250 155
630 315 155
630 400 155
630 500 155
630 630 155
800 315 155
800 400 155
800 500 155
800 630 155
800 800 155
1000 400 155
1000 500 155
1000 630 155
1000 800 155
1000 1000 155
1250 500 155
1250 630 155
1250 800 155
1250 1000 155
1250 1250 155
description:
  • flexible duct enable to eliminate vibrations transmitted by the devices
  • vibrations elimination material - flexible tape
  • we are able to produce elements with different dimensions - up to 2000 x 2000 mm
Plenum box I

skrzynka-rozprężna-1

size [mm] grill dimensions [mm] a x a [mm] h [mm] d [mm] b [mm]
0 190x190 150x150 210 125 180
1 245x245 200x200 240 160 180
2 300x300 260x260 240 160 180
3 350x350 315x315 300 160 180
4 410x410 360x360 300 200 180
5 470x470 420x420 350 200 180
6 500x500 460x460 350 250 180
7 600x600 550x550 400 250 180
description:
  • possible box without a damper or box with built-in damper
  • hot galvanized steel
  • connections (spot embossments)
  • we are able to produce elements with different dimensions
Plenum box II

skrzynka-rozprężna-2

air valve size [mm] a x a [mm] h [mm] d [mm] b [mm]
295 x 295 167x167 240 158 180
370 x 370 240x240 300 158 180
445 x 445 320x320 350 198 180
520 x 520 395x395 350 248 180
595 x 595 470x470 400 248 180
description:
  • possible box without a damper or box with built-in damper
  • hot galvanized steel
  • connections (spot embossments)
  • we are able to produce elements with different dimensions
Steel frame with mesh

ramka-z-siatką

possible dimensions range:
h [mm] 200 - 2000
z [mm] 200 - 2000
description:
  • hot galvanized steel
  • spot welding
  • expanded metal mesh, openings 10 x 10 [mm]
  • we are able to produce elements with different dimensions
Frame profiles

profile-ramkowe

description:
  • frame profiles for square ventilation channels
  • hot galvanized steel
  • 0,7 mm sheet thickness available
  • standard length - 5 m
  • package - 100 pcs (500 m)
  • we are able to produce elements with different length - 2m or 3m
  • we are able to produce elements with stainless steel 1.4301
Frame angels

Narożniki-ramkowe

description:
  • frame angles for square ventilation channels
  • hot galvanized steel
  • package - S20 - 300 pcs, S30 - 200 pcs
  • we are able to produce elements with stainless steel 1.4301
Grating slat

piórko-kierunkowe

description:
  • hot galvanized steel
  • grating slats are used as accessories for ventilation gratings
  • standard length - 3 m
  • package - 50 pcs (150 m)
Accessories for roof air intake units

akcesoria1.1 akcesoria1.2 akcesoria1.3

name length [m] package [szt.]
65 feather 5,00 50
pressed frame 5,00 48
frame 5,00 48
description:
  • hot galvanized steel
  • spot welding on pressed frame enable to orientate the feather span simply and fast
Suspension profiles

6_1_profile_montazowe

TYPE length [m] package contains
 pcs  m kg
M27/18/1.20  5.00 100 500 255.0
 M30/30/1.50  5.00  100  500  500.0
 M30/45/1.50  5.00  100  500  658.0
 M30/45/2.00  5.00  100  500  787.0
description:
  • hot galvanized steel
  • product has a Technical Approval: AT-15-7086/2006
  • we are able to produce elements with different length - 2m or 3m
Pipe clips for round ducts

obejmy-do-przewodów

diameter [mm] pcs/box nut
80 60 M8/M10
100 60 M8/M10
125 60 M8/M10
150 60 M8/M10
160 60 M8/M10
180 60 M8/M10
200 30 M8/M10
225 30 M8/M10
250 30 M8/M10
315 30 M10
355 15 M10
400 15 M10
500 10 M10
630 10 M10
description:
  • pipe clips eneble to hang round duct networks
  • a gasket prevents the transmission of vibrations from the system
  • easy system of locking and tightening ensures fast assembly
Ventilation duct clip

SONY DSC

description:
  • thickness - 2,35 mm
  • M8 x 25 mm screw
  • box - 200 pcs.
Clip profile

listwa zaciskowa(1)

name code package contains [pcs] length [m] weight [kg]
LZ 20 0920M20300 30 3,00 29
LZ 20 0920M20500 30 5,00 49
description:
  • hot galvanized steel
Screwed bar handle

SONY DSCuchwyt-pręta-gwintowanego

TYPE x [mm] h [mm] d [mm] M [mm] package (pcs)
DWK M6 48 42 M6 10 50
DWK  M8 38 35 M8 10 50
DWK M10 45 42 M10 10 50
L suspension profile with shock absorbing rubber

SONY DSCzawiesie-typu-L

description:
  • hot galvanized steel
  • destined for assembly of rectangular ventilation ducts
  • a rubber shock absorber prevents the transmission of vibrations from the system
  • box - 100 pcs.
Z suspension profile with shock absorbing rubber

SONY DSCzawiesie-typu-R

description:
  • hot galvanized steel
  • destined for assembly of rectangular ventilation ducts
  • a rubber shock absorber prevents the transmission of vibrations from the system
  • box - 100 pcs.
R suspension profile with shock absorbing rubber

SONY DSCZawiesie-R

description:
  • hot galvanized steel
  • destined for assembly of round ventilation ducts
  • a rubber shock absorber prevents the transmission of vibrations from the system
  • box - 100 pcs.
V suspension profile with shock absorbing rubber

SONY DSCzawiesie-V

description:
  • hot galvanized steel
  • destined for assembly of round ventilation ducts
  • gumowy amortyzator eliminuje przenoszenie drgań z instalacji na inne elementy
  • box - 100 pcs.
Metal band clip

taśma

 

description:
  • tape for clip bands
  • material - stainless steel
  • width - 9 mm
  • roll box - 30 m
  • handy plastic package
Clip fastener

6_10_zamek_zaciskowy

description:
  • clip fastener and metal band clip enable to make clip bands on any diameter
  • box - 50 pcs
Perforated tape

SONY DSCtaśma-perforowana

TYPE lenght weight
TP 0,5 x 17 mm 25 1,35
TP 0,5 x 25 mm 25 2,83
TP 0,7 x 17 mm 25 1,87
TP 0,7 x 20 mm 25 2,15
TP 0,7 x 25 mm 25 3,22
description:
  • perforated galvanized steel tape
Self-adhesive nails

6_12_gwozdzie

description:
  • self adhesive nails are used for mechanical fixing on insulation materialsh
  • długość L=32 mm oraz L=51 mm
Aluminium insulation tape

SONY DSC

width [mm] lenght [m] packing [szt.]
50 50 24
75 50 16
description:
  • single sided self-adhesive aluminium insulated tape
  • hardly combustible according to DIN 4101B1 standard
  • carrier: aluminium, thickness 0,03 mm
  • temperature range: -30OC; +120OC
Reinforced aluminium insulation taoe

SONY DSC

width [mm] lenght [mm] packing [szt.]
50 50 24
70 50 16
description:
  • tape reinforced with 5 x 5 mm carbon fibre net, laminated with polyethylene
  • hardly combustible according to DIN 4101B1 standard
  • carrier: aluminium, thickness 0,03 mm
  • temperature range: -30OC; +120OC
Assembly silicone

SONY DSC

description: Product can be used both outdoors and indoors. Tightening mass is very adhesive to most materials. Package: 310ml.
PES gasket

SONY DSC

width [mm] thickness [mm] package [m]
10 4 100
15 4 60
opis:
  • destined for tightening rectangular  ventilation ducts
  • material: polyethylene foam
Zinc spray

SONY DSC

description: Used to protect damaged galvanized surfaces from corrosion. Product is resistant to abrasion and creates a durable coating. Package: 400ml.
Screwed bar

SONY DSC

description:
  • types: M8, M10
  • galvanized by flames
  • length - 2 m
Anchor bush

SONY DSC

 

description:
  • breakable galvanized steel
    M 8 x 30 mm  (box - 100 pcs.)
    M 10 x 30 mm (box - 50 pcs.)
  • spreading brass sleeve
    M 8 x 27 mm (box - 100 pcs.)
Shock absorbing rubber

6_20_guma_amortyzujaca

description:
  • a rubber prevents the transmission of vibrations
  • for assembly shape of:
    M27/18/1.2
    M30/30/1.5
    M30/45/1.5
    M30/45/2.0
Galvanized screw

6_22_nakretka_ocynkowana

TYPE package [kg]
M 8 5 lub 10
M 10 5 lub 10
Self drilling metal sheet screws

6_21_blachowkrety

description:
  • hexagonal head 7 mm
  • types:  4,2 x 13 mm, 4,8 x 16 mm
  • box - 1000 pcs.
Galvanized connecting nut

6_23_nakretka_zLaczna_ocynkowana

TYPE package [szt.]
M8 x 25 50
M10 x 25 50
Galvanized nut

6_24_sruba_ocynkowana

TYPE package [kg]
M 8 x 25 5 lub 10
M 10 x 25 5 lub 10
Enlarged galvanized washer

SONY DSC

TYPE package [kg]
M 8 10
M 10 10
Metal screws magnetic tip

SONY DSC

description:
  • magnetic tip can be used for hexagonal head sheet metal screws
  • size 7 mm